Inferno333

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 19 total)

Posted In:


  • Participant
    Inferno333 on · in reply to: Driver recommendation for chest thumping bass for HT #11352

    Ohh shoot. I didn’t realize you were way over there.

    Good luck bud!


    Participant
    Inferno333 on · in reply to: Driver recommendation for chest thumping bass for HT #11350

    I actually have a nicely finished 12″ sealed enclosure sitting here not being used. What kind of volume are you looking at?


    Participant
    Inferno333 on · in reply to: AE IB15 15" subwoofers 4 for $299 #11373

    Wish I lived near you!


    Participant
    Inferno333 on · in reply to: Driver recommendation for chest thumping bass for HT #11347

    I might be interested in the drivers from your old SVS subwoofer. 🙂

    Are you going to be building a new enclosure and buying a driver?


    Participant
    Inferno333 on · in reply to: Recone parts for SBP #11327

    @stryke wrote:

    The standard coils are all 38mm long.

    Best Regards,
    John

    If I were to provide the parts would you be able to build it into an 8″ driver?


    Participant
    Inferno333 on · in reply to: Recone parts for SBP #11325

    @stryke wrote:

    We have had a policy for some time to not supply any parts. It is a matter of very limited inventory, others wishing to duplicate our woofers, and many failed recone attempts made by even experienced reconers. Is it just a motor or the motor plus frame? A normal recone would be $125 plus shipping both ways. If it needs a frame that would be an additional cost as well.

    I did not know that. I hadn’t been on here for long time.

    It’s just the motor. I snagged it because I know the effort put into making it. I’ll give it some thought on what I’d like to do with it.

    Any chance you would share what wind width the stock coil was? 🙂


    Participant
    Inferno333 on · in reply to: Recone parts for SBP #11322

    I saw you reply to a different thread John. 😉

    This motor is getting delivered today.


    Participant
    Inferno333 on · in reply to: Recone parts for SBP #11324

    John… 😆

    Let’s hear it bud.


    Participant
    Inferno333 on · in reply to: Letter designations? #11121

    Thank you for the explanation! I’ve pondered the same question over the years.


    Participant
    Inferno333 on · in reply to: Air volume occupied by a TD15M? #11096

    Probably around .1 cuft.


    Participant
    Inferno333 on · in reply to: Previous status updates of all Acoustic Elegance Orders #8727

    @simpleton wrote:

    Great. Those MISCO drivers look awesome, just like a TD12M-A 🙄 What a nightmare, looks like I can’t get out of it no matter what I try.

    You do realize that it’s just a frame coming from MISCO? It’s just an open source tooling for the basket. No big deal bud.

    The rest of the driver is being built by AE with AE parts.


    Participant
    Inferno333 on · in reply to: Coil Size on the AE Drivers? #9914

    I’ll be heading up to Sheboygan, WI hopefully in the next month. Is Green Bay that long of drive from there?

    Maybe I could come up and visit in person.


    Participant
    Inferno333 on · in reply to: Coil Size on the AE Drivers? #9912

    I didn’t mean that I needed all the specs. I meant things like sleeves, shorting rings, gap depth, etc. Not really specifics. Just general stuff.

    I have my own coils to use. TC Sounds 2″ LMT.

    It sounds like he could have most of what I need.


    Participant
    Inferno333 on · in reply to: Coil Size on the AE Drivers? #9910

    Interesting!

    I would need to know a lot more about the parts he has available and what the motor has for specs.


    Participant
    Inferno333 on · in reply to: Coil Size on the AE Drivers? #9908

    I wonder if I could buy a pair of motors for some custom drivers. He could even build them for me.

Viewing 15 posts - 1 through 15 (of 19 total)