Any update dual TD10M/NeoPro5i monitors?


  • Member
    pbc on #3275

    Thanks John . I think the standard box is 1.3, but guess I could consider building my own. Only issue would be figuring out the crossover as I have no experience with it. Wonder if I could use a 2×4 minidsp to mock up a few active xovers before figuring out the right one and building some passives.

    What is the lead time on TD8Xs and price?

    Would I be giving up much in the mid range to say a high end brick and mortar 3 way design?


    Member
    pbc on #3276

    Also, what are the cutouts require for the TD8x?


    Participant
    stryke on #3277

    Here are the diameters of the woofer. The overall frame diameter is 203 mm. The cutout hole for mounting would be 183mm.

    Anonymous on #3278

    I’m very interested in using these as at least the LCR channels in a HT I’m working on. Would using these at the surround channels be overkill?


    Participant
    stryke on #3279

    @ezequieldeeter wrote:

    I’m very interested in using these as at least the LCR channels in a HT I’m working on. Would using these at the surround channels be overkill?

    Typically for surrounds you could get away with the single TD10M and ribbon instead of using the MTM to save cost. You don’t really need the output from the dual TD10M’s

Viewing 5 posts - 61 through 65 (of 65 total)

You must be logged in to reply to this topic.